System Parameter Definitions and Seeded Values

System Parameters
MYREQBCCCAMPSTAFF System Parameter
General Information

This parameter controls who is Blind CC'd on the My Request page. The default message values are No. Changing the values to Yes will send messages. Attribute1, 2, and 3 match the Camp Director, Assistant Camp Director, and Camp Webmaster setup on the manage camps page.

Seeded Values
  • Attribute1 - No (Camp Director)
  • Attribute2 - No (Assistant Camp Director)
  • Attribute3 - No (Camp Webmaster)
Back to Top
MYREQCCCAMPSTAFF System Parameter
General Information

This parameter controls who is CC'd on the My Request page. The default message values are No. Changing the values to Yes will send messages. Attribute1, 2, and 3 match the Camp Director, Assistant Camp Director, and Camp Webmaster setup on the manage camps page.

Seeded Values
  • Attribute1 - No (Camp Director)
  • Attribute2 - No (Assistant Camp Director)
  • Attribute3 - No (Camp Webmaster)
Back to Top
MYREQENHANCEMENT System Parameter
General Information

This parameter controls who receives product enhancement requests. This value should not be modified without approval from support.

  • Attribute1 - Email of person for product support.
  • Attribute2 - Name of person for product support.
Back to Top
MYREQOVERRIDEEMAIL System Parameter
General Information

This parameter controls who the request is sent to on the My Requests page. If this value is set, the MYREQTOCAMPSTAFF System Parameter is ignored.

Seeded Values
  • Attribute1 - Email of person receiving the message.
  • Attribute2 - Name of person receiving the message.
Back to Top
MYREQTOCAMPSTAFF System Parameter
General Information

This parameter controls who the request is sent to on the My Request page. The default message values are No. Changing the values to Yes will send messages. Attribute1, 2, and 3 match the Camp Director, Assistant Camp Director, and Camp Webmaster setup on the manage camps page.

Seeded Values
  • Attribute1 - No (Camp Director)
  • Attribute2 - No (Assistant Camp Director)
  • Attribute3 - No (Camp Webmaster)
Back to Top
XX_ADMINMENUOTHER System Parameter
General Information

This parameter controls the Other Menu description on the Admin Page.

Seeded Values
  • Attribute1 - Other Items
  • Attribute2 - ZZ_OTHER
Back to Top
XX_ADMINMENUREPORTS System Parameter
General Information

This parameter controls the Reports Menu description on the Admin Page.

Seeded Values
  • Attribute1 - Reports
  • Attribute2 - Z_REPORTS
Back to Top
XX_ALLOWINITIALASSGN System Parameter
General Information

This parameter controls if a unit user can select an initial assignment. If this value is set to No, a camp staff user will need to create a unit assignment for the unit leader before he or she can register for courses.

Seeded Values
  • Attribute1 - Yes
Back to Top
XX_ALLOWSYSTEMEMAILOVERRIDE System Parameter
General Information

The parameter allows the from address on the send messages page to be modified.

Seeded Values
  • Attribute1 - No
Back to Top
XX_ALLOWUNITUSERINACTIVATEUSER System Parameter
General Information

This parameter controls if a unit user is allowed to inactivate the person record of a person assigned to her or his unit and has an user account. While this function can be allowed, it is recommended that it stays set to No.

Seeded Values
  • Attribute1 - No
Back to Top
XX_APPBUILDINFO System Parameter
General Information

The current build number of the application is stored in attribute1. It is informational in purpose, and it is displayed on the System Information page.

Seeded Values
  • Attribute1 - Current Build Version
Back to Top
XX_APPLICATIONSUBTITLE System Parameter
General Information

By changing attribute1 of this parameter, the sub title on all pages will be changed to attribute1's text.

Seeded Values
  • Attribute1 > Summer Camp Systems
Back to Top
XX_APPLICATIONTITLE System Parameter
General Information

By changing attribute1 of this parameter, the title on all pages will be changed to attribute1's text.

Seeded Values
  • Attribute1 > Summer Camp Systems
Back to Top
XX_AUTHORIZENET System Parameter
General Information

This parameter controls connectivity to Authorize.net for Online Payments. These values will be provided by Authorize.net.

Seeded Values
  • Attribute1 - URL to Authorize.net Envionment
  • Attribute2 - Login ID provided by Authorize.net
  • Attribute3 - Authorize.net Transaction Type
  • Attribute4 - Authorize.net Test Request
  • Attribute5 - Receipt Link Text
  • Attribute6 - Authorize.net Transaction Key
  • Attribute7 - Authorize.net Signature Key
Back to Top
XX_BYPASSMERCHANT System Parameter
General Information

This parameter is used to turn off the call to merchant providers. If set to Yes, the payment order is generated, but it will not route to the merchant provider's payment form.

Seeded Values
  • Attribute1 - No
Back to Top
XX_CAMPADMINMENUFULFILL System Parameter
General Information

This parameter controls the name of the Camp Analytics Menu in the Camp Admin Page.

Seeded Values
  • Attribute1 - Camp Analytics
  • Attribute2 - X_CAMPANALYTICS
Back to Top
XX_CAMPADMINMENUOTHER System Parameter
General Information

This parameter controls the name of the Other Menu in the Camp Admin Page.

Seeded Values
  • Attribute1 - Other Items
  • Attribute2 - ZZ_OTHER
Back to Top
XX_CAMPADMINMENUREPORTS System Parameter
General Information

This parameter controls the name of the Reports Menu in the Camp Admin Page.

Seeded Values
  • Attribute1 - Reports
  • Attribute2 - Z_REPORTS
Back to Top
XX_CAMPUSERCAMENU System Parameter
General Information

This parameter controls the name of the Camp Analytics Menu in the Camp User Page.

Seeded Values
  • Attribute1 - Camp Analytics
  • Attribute2 - W_CAMPANALYTICS
Back to Top
XX_CAMPUSERMENUCRSCOMPL System Parameter
General Information

This parameter controls the name of the Course Completion Menu in the Camp User Page.

Seeded Values
  • Attribute1 - Course Completion
  • Attribute2 - X_COURSECOMPLETION
Back to Top
XX_CAMPUSERMENUEVNTCHG System Parameter
General Information

This parameter controls the name of the Event Charges Menu in the Camp Admin Page.

Seeded Values
  • Attribute1 - Event Charges
  • Attribute2 - W_EVENTCHARGES
Back to Top
XX_CAMPUSERMENUOTHER System Parameter
General Information

This parameter controls the name of the Other Menu in the Camp User Page.

Seeded Values
  • Attribute1 - Other Items
  • Attribute2 - ZZ_OTHER
Back to Top
XX_CAMPUSERMENUREPORTS System Parameter
General Information

This parameter controls the name of the Reports Menu in the Camp User Page.

Seeded Values
  • Attribute1 - Reports
  • Attribute2 - Z_REPORTS
Back to Top
XX_CASHCHECKORDERSTATUS System Parameter
General Information

This parameter should be set to either Pending or Posted. This is used to determine if a cash or check payment order should be set to Pending or Posted.

  • Attribute1 should either be PENDING or POSTED in upper case.
  • Attribute2 should either be Pending or Posted in Proper Case.
Seeded Values
  • Attribute1 - PENDING
  • Attribute2 - Pending
Back to Top
XX_CREATEUSERACCOUNT System Parameter
General Information

When attribute1 of this parameter is set to Y, the Create User Account link is displayed on the main login page. Otherwise, it is removed meaning that all accounts will be created by an administrator.

Seeded Values
  • Attribute1 > Y
Back to Top
XX_CRSCOMPPOSTINGSTATUS System Parameter
General Information

This parameter is used to default the course posting status during course completion transfer. Possible values are DRAFT, PROCESSED, POSTED. A value of DRAFT follows the seeded process, where records will be reviewed and processed by a camp user before posting. A value of PROCESSED means records will be transferred ready to Post. A value of POSTED means records are transferred in posted status and available to unit users immediately.

Seeded Values
  • Attribute1 - DRAFT
Back to Top
XX_CURRENTEVENTYEAR System Parameter
General Information

This parameter is used to determin the current event year. It is used to help determin session parameters for defaulting the event to camp user, camp admin or admin forms.

Seeded Values
  • Attribute1 > -1
Back to Top
XX_DBLOGFILE System Parameter
General Information

For Future use! Attribute1 will be the name of the log file written from the database.

Seeded Values
  • Attribute1 > scsdblog.txt
Back to Top
XX_DBLOGPATH System Parameter
General Information

For Future use! Attribute1 is set with the path after the root folder.

Seeded Values
  • Attribute1 > /logs/
Back to Top
XX_DBLOGTYPE System Parameter
General Information

For Future use! In the current build, attribute1 should not be changed.

Seeded Values
  • Attribute1 > DB
Back to Top
XX_DEFAULTREQTYPE System Parameter
General Information

This parameter is used to restrict the Course Application with Requirements by requirement type. It is very critical to understand that this parameter will exclude applications from the report. Before changing this parameter, the Course Application with Requirements report documentation should be reviewed.

The system parameter should be updated with attribute2 values from the XX_COURSEREQTYPE lookup. If you do not wish to filter the report results, leave it as a percentage (%).

Seeded Values
  • Attribute1 - %
Back to Top
XX_DEFCREATEACCTUSERTYPE System Parameter
General Information

This parameter is used to default the user type to the create account page. The value in Attribute1 should be UNITUSER, PARENT, or INDIVIDUAL.

Seeded Values
  • Attribute1 - UNITUSER
Back to Top
XX_DEFCRSCOMPLETIONSTATUS System Parameter
General Information

This parameter can either be set to COMPLETE or INCOMPLETE. It is the default value transferred to each course completion summary record during the transfer.

Seeded Values
  • Attribute1 - COMPLETE
Back to Top
XX_DEFCRSREQCOMPLETIONSTATUS System Parameter
General Information

This parameter is used to default the course requirement course completion status if it is left empty on a course requirement import.  It should either be COMPLETE or INCOMPLETE depending on user preference.

Seeded Values
  • Attribute1 - COMPLETE
Back to Top
XX_DEFCRSCOMPLETIONFULFILLSTAT System Parameter
General Information

This parameter is used to default the course fulfillment status if it is left empty on a course import.  It should either be FULFILLED or NOTFULFILLED depending on user preference.

Seeded Values
  • Attribute1 - NOTFULFILLED
Back to Top
XX_DISPLAYSYSTEMADMINEMAIL System Parameter
General Information

When attribute1 of this system parameter is set to Yes, a message string is built to display the system administrators email address to the end user. Attribute2 is concatenated to the value of XX_SYSTEMADMINEMAIL system parameter and then concatenated to attribute3. The message is displayed after the message in the system parameters for XX_LOGINLOCKEDUSER or XX_LOGINUNAPPROVEDUSER system parameters.

Seeded Values
  • Attribute1 - No
  • Attribute2 - Please contact
  • Attribute3 - for assistance.
Back to Top
XX_DISPLAYUNITLDRINREG System Parameter
General Information

This parameter controls unit leaders being displayed in the MyRegistrations form. When this value is set to Yes, all active people with valid person organization and person unit assignments will show in the MyRegistration window. When this value is set to No and the Person Unit Leader attribute is set to Yes, the person will be excluded from the MyRegistration form.

Seeded Values
  • Attribute1 > No
Back to Top
XX_EMAILRECIPIENTERRORMESSAGE System Parameter
General Information

This parameter is used when a email recipient has an error on a user defined mail message.

Seeded Values
  • Attribute1 - Your message was not sent. Invalid Recipient.
Called By
  • MailMessages.cs - SendMail
Back to Top
XX_ENFORCECOURSEAREA System Parameter
General Information

This parameter is used to enforce if an area is required on a course record or a event course relationship record. A value of Yes will require these values.

Seeded Values
  • Attribute1 - No
Called By
  • Camp Admin - ManageCourses.aspx
  • Camp Admin - AddCourse.aspx
  • Camp User - ManageEventCourseRelationships.aspx
  • Camp User - AddEventCourseRelationship.aspx
  • Camp User - EventCourseMassAdditions.aspx
  • Camp User - Import.aspx
Back to Top
XX_ENFORCECOURSELOC System Parameter
General Information

This parameter is used to enforce if a location is required on a course record or a event course relationship record. A value of Yes will require these values.

Seeded Values
  • Attribute1 - No
Called By
  • Camp Admin - ManageCourses.aspx
  • Camp Admin - AddCourse.aspx
  • Camp User - ManageEventCourseRelationships.aspx
  • Camp User - AddEventCourseRelationship.aspx
  • Camp User - EventCourseMassAdditions.aspx
  • Camp User - Import.aspx
Back to Top
XX_FORCEPERSONUNITRELDELETE System Parameter
General Information

When this parameter is set to Yes, a person unit relationship can be deleted even if registration record exist. This parameter should only be changed by experience administrators or if instructed by support.

Seeded Values
  • Attribute1 - No
Called By
  • Camp User - ManagePersonUnitAssignments.aspx
Back to Top
XX_FORGOTUSERNAMEBODY System Parameter
General Information

This parameter as the body of an email message to a user when he or she has forgotten his or her password. This message is concatenated to a space and the user name.

Seeded Values
  • Attribute1 - Your username is
Called By
  • RecoverUserName.aspx.cs - Button1_Click
Back to Top
XX_FORGOTUSERNAMESUBJECT System Parameter
General Information

This parameter as the subject line of an email message to a user when he or she has forgotten his or her password.

Seeded Values
  • Attribute1 - Your Username.
Called By
  • RecoverUserName.aspx.cs - Button1_Click
Back to Top
XX_INDREGREQADDRESS System Parameter
General Information

When this system parameters attribute1 is set to Yes, an individual user cannot register for an event until an address is entered on the MyInfo page.

Seeded Values
  • Attribute1 - No
Back to Top
XX_INDREGREQBIRTHDATE System Parameter
General Information

When this system parameters attribute1 is set to Yes, an individual user cannot register for an event until an address is entered on the MyInfo page.

Seeded Values
  • Attribute1 - No
Back to Top
XX_INDREGREQEMAIL System Parameter
General Information

When this system parameters attribute1 is set to Yes, an individual user cannot register for an event until a primary email is entered on the MyInfo page.

Seeded Values
  • Attribute1 - Not
Back to Top
XX_INDREGREQGENDER System Parameter
General Information

When this system parameters attribute1 is set to Yes, an individual user cannot register for an event until a gender is entered on the MyInfo page.

Seeded Values
  • Attribute1 - No
Back to Top
XX_INDREGREQPHONE System Parameter
General Information

When this system parameters attribute1 is set to Yes, an individual user cannot register for an event until a primary phone is entered on the MyInfo page.

Seeded Values
  • Attribute1 - No
Back to Top
XX_LICENSEFILE System Parameter
General Information

This is the file name of the license key. This file is no longer used. It was replaced by XX_LICENSEKEY system parameter.

Seeded Values
  • Attribute1 > license.txt
Called By
  • N/A
Back to Top
XX_LICENSEKEY System Parameter
General Information

This is the license key for the application. It is provided by support and placed in attribute1.

Seeded Values
  • Attribute1 > Provided By Support
Called By
  • N/A
Back to Top
XX_LICENSEPATH System Parameter
General Information

This is the file path of the license key. This path is no longer used. It was replaced by XX_LICENSEKEY system parameter.

Seeded Values
  • Attribute1 > \license\
Called By
  • N/A
Back to Top
XX_LOOKUPNAVALUE System Parameter
General Information

It is used to display the word N/A in certain places within the application.

Seeded Values
  • Attribute1 > N/A
Called By
  • N/A
Back to Top
XX_LOGININVALIDPASSWORD System Parameter
General Information

This parameter contains the message that is displayed to the end user when an invalid password is given.

Seeded Values
  • Attribute1 - Invalid Password.
Back to Top
XX_LOGININVALIDUSER System Parameter
General Information

This parameter contains the message that is displayed to the end user when an invalid username is given.

Seeded Values
  • Attribute1 - Invalid User.
Back to Top
XX_LOGINLOCKEDUSER System Parameter
General Information

This parameter contains the message that is displayed to the end user when the user account is locked because of too many invalid attempts. This message can be combined with the XX_DISPLAYSYSTEMADMINEMAIL system parameter to display a message with the system administrators contact email.

Seeded Values
  • Attribute1 - This user account has been locked because of too many invalid attempts.
Back to Top
XX_LOGINUNAPPROVEDUSER System Parameter
General Information

This parameter contains the message that is displayed to the end user when the user account has not been approved. Accounts are typically approved from the account creation process. However, they can be manually approved by a system administrator. This message can be combined with the XX_DISPLAYSYSTEMADMINEMAIL system parameter to display a message with the system administrators contact email.

Seeded Values
  • Attribute1 - This user account has been locked because of too many invalid attempts.
Back to Top
XX_MERCHANTFINALIZEORDER System Parameter
General Information

This parameter allows an online payment order to be set to Posted. If the end user clicks the link on the merchant provider's payment form to return to the application, this parameter is checked on the return confirmation. If Attribute1 is set to Yes, the order will automatically be posted.

Seeded Values
  • Attribute1 - Yes
Back to Top
XX_MERCHANTID System Parameter
General Information

This parameter is provided by the Merchant Provider. It is the Merchant ID that identifies the merchant.

Seeded Values
  • Attribute1 - Provided By Merchant Provider
Back to Top
XX_MERCHANTPROVIDER System Parameter
General Information

This parameter signifies which payment provider is being used.

  • Currently, there are only two merchant providers integrated with Summer Camp Systems. Possible values are:
  • Attribute1 - AUTHORIZENET
Seeded Values
  • Attribute1 - null
Back to Top
XX_MINIMUMBIRTHDATE System Parameter
General Information

This parameter should be set to a valid date. When the birthdate required system parameters are set to Yes, it uses this date to validate that the entered birthdate is greater than or equal to this date.

Seeded Values
  • Attribute1 - 1/1/1930
Back to Top
XX_MYPEOPLEACTIVEFLAG System Parameter
General Information

This parameter sets the active flag on the unit user my people page. Possible values are Yes, No, and -1. When set to Yes, the result set will only show active people. When set to -1, the result set will show active and inactive people. When set to No, it will show only inactive people.

Seeded Values
  • Attribute1 - Yes
Back to Top
XX_ONLINEORDERSTATUS System Parameter
General Information

This parameter should be set to either Pending or Posted. This is used to determine if a credit card or electronic payment order should be set to Pending or Posted.

  • Attribute1 should either be PENDING or POSTED in upper case.
  • Attribute2 should either be Pending or Posted in Proper Case.
Seeded Values
  • Attribute1 - PENDING
  • Attribute2 - Pending
Back to Top
XX_ONLINEPAYMENTSURCHARGE System Parameter
General Information

This parameter is used to calcuate a surcharge for online payment orders. Attribute1 should have a numeric decimal of the surcharge amount. Attribute2 should have a message to the end user regarding the charged amount.

Seeded Values
  • Attribute1 - 0
  • Attribute2 - A 0% surcharge will be added to your payment when using the online payment feature.
Back to Top
XX_ONLINEPAYMENTWARNING System Parameter
General Information

This parameter displays a warning message to the end user on the process order page when an online payment order is selected.

Seeded Values
  • Attribute1 - WARNING: Once the Complete Order button is clicked; you will be routed to the payment providers website.
  • Attribute2 - Please do not use the browsers back button or click the complete order button more than once.
Back to Top
XX_RECOVERUSERNAMEBADEMAILMESSAGE System Parameter
General Information

This paramater is returned to the end user when the forgot user name cannot find the email address entered in the form.

Seeded Values
  • Attribute1 - The email you entered does not have an account associated with it. Please contact your local system administrator for help.
Back to Top
XX_REGCOMPLETIONSTATUS System Parameter
General Information

This parameter is used to determine the default registration completiion status for course completion.  Attribute1 should be INCOMPLETE to use course completion or COMPLETE to not use course completion.  Attribute2 should be UPDATED to use course completion or COMPLETE to not use course completion.

Seeded Values
  • Attribute1 - COMPLETE
  • Attribute2 - COMPLETE
Back to Top
XX_REGFULFILLSTATUS System Parameter
General Information

This parameter is used to determine the default registration fulfillment status for course completion.  Attribute1 should be NOTFUFILLED to use fulfillment or FULFILLED to not use fulfillment.  Attribute2 should be UPDATED to use fulfillment or FULFILLED to not use fulfillment.

Seeded Values
  • Attribute1 - FULFILLED
  • Attribute2 - FULFILLED
Back to Top
XX_REGMESSAGEPREFIX System Parameter
General Information

This parameter shows the message to unit leaders on the My Registrations page for registration dates.

Seeded Values
  • Attribute1 - Registration Period:
Back to Top
XX_REGMESSAGETIMEZONE System Parameter
General Information

This parameter shows the timezone of the server to unit leaders on the My Registrations page for registration dates.

Seeded Values
  • Attribute1 - PST
Back to Top
XX_REQUIREBIRTHDATEFORCAMPUSER System Parameter
General Information

This parameter should either be Yes or No. When set to Yes, a camp user will be required to enter a birthdate when creating a person.

Seeded Values
  • Attribute1 - No
Back to Top
XX_REQUIREBIRTHDATEFORUNITUSER System Parameter
General Information

This parameter should either be Yes or No. When set to Yes, an unit user will be required to enter a birthdate when creating a person.

Seeded Values
  • Attribute1 - No
Back to Top
XX_REQUIREPERSONNOFORCAMPUSER System Parameter
General Information

If this value is set to Yes, the Person No field will be required on the people pages in the camp user function.

Seeded Values
  • Attribute1 - No
Back to Top
XX_REQUIREPERSONNOFORMYINFO System Parameter
General Information

If this value is set to Yes, the Person No field will be required on the MyInfo page.

Seeded Values
  • Attribute1 - No
Back to Top
XX_REQUIREPERSONNOFORUNITUSER System Parameter
General Information

If this value is set to Yes, the Person No field will be required on the people pages in the unit user function.

Seeded Values
  • Attribute1 - No
Back to Top
XX_SENDACCTCREATIONEMAIL System Parameter
General Information

It is used to turn on or off account creation emails. It was designed for development enviornments where administrators can stop email communications. A value of Yes in attribute1 will send emails. A value of No in attribute1 will not send emails.

Seeded Values
  • Attribute1 - No
Back to Top
XX_SENDFILEUPLOADEMAIL System Parameter
General Information

When this parameter is Yes, email messages will be sent when unit leaders upload files. It will send emails to the XX_FILEUPLOADEMAILLIST LookupValue distribution list.

Seeded Values
  • Attribute1 - No
Back to Top
XX_SMTPENABLESSL System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SMTPEXCEPTIONERRORMESSAGE System Parameter
General Information

This paramater is returned to the end user when there is an exception from sending a user defined email message.

Seeded Values
  • Attribute1 - Your message was not sent. An exception has occurred. Please check the system logs.
Back to Top
XX_SMTPHOST System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SMTPPASSWORD System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SMTPPORT System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SMTPSENDMODE System Parameter
General Information

This parameter determines if messages should be sent from the send messages form. The default value is YES, which means messages are sent. Changing this value to NO, will not send messages but will log them to the log files in case system administrators need to review them.

Seeded Values
  • Attribute1 - YES
Back to Top
XX_SMTPUSEDEFAULTCREDENTIALS System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SMTPUSERNAME System Parameter
General Information

This parameter is used by product support for testing purposes. It should not be used in the normal setup of a production system.

Seeded Values
  • Attribute1 - null
Back to Top
XX_SYSTEMADMINEMAIL System Parameter
General Information

This parameter is displayed to the end user when an user is not approved or locked out. It should represent the email address where an end user can contact the system administrator.

Seeded Values
  • Attribute1 - support@summercampsystems.com
Back to Top
XX_SYSTEMEMAILADDRESS System Parameter
General Information

The value in attribute1 will be the default email address used by the system to send emails. The value in attribute2 will be the name send on emails. These should be modified during setup if you are not hosting with Summer Camp Systems.

Seeded Values
  • Attribute1 - admin@summercampsystems.com
  • Attribute2 - SCS Administrator
Back to Top
XX_SYSTEMFROMEMAILERRORMESSAGE System Parameter
General Information

This is used to display an error message to the end user when sending an email if the from address can't be determined.

Seeded Values
  • Attribute1 > Invalid From Email Address.
Called By
  • MailMessages.cs - SendMail
Back to Top
XX_SYSTEMLOGFILE System Parameter
General Information

The value in attribute1 will be the file name of the log file used for the application. When logging into the application, the current session ID is prefixed on this file name, so it is unique to the session.

Seeded Values
  • Attribute1 > scslog.txt
Back to Top
XX_SYSTEMLOGFILELINKPATH System Parameter
General Information

The value in attribute1 will be the path to the logs director from the admin folder. It is used by the ViewAppLog webpage to display a link to all the log files in the logs folder.

Seeded Values
  • Attribute1 - ../logs/
Back to Top
XX_SYSTEMLOGLEVEL System Parameter
General Information

This is the current level at which the application is logging. A change in this value requires users to log out and log back in.

  • 0 - No Logging Even if no logging is used, a file is written to the log directory for each session. This is the recommended setting for production environments.
  • 1 - Minimal Logging. As different routines are executed, the beginning and end of the routine is written to the log.
  • 2 - Medium Logging. As different routines are executed, key areas within the routine are written to the log such as finishing a SQL statement or a call to another routine.
  • 3 - All Logging. As routines are executed, event event in the routine is written to the log. All variable assignments, function returns, and parameters are written to the log.
Seeded Values
  • Attribute1 - 0
Called By
  • N/A
Back to Top
XX_SYSTEMLOGPATH System Parameter
General Information

The value in attribute1 will be the file path after the root directory where the log file is written.

Seeded Values
  • Attribute1 > \logs\
Called By
  • N/A
Back to Top
XX_SYSTEMMAILSUCCESSMESSAGE System Parameter
General Information

The value in attribute1 will be the message returned to the end user when the system sends an email message at the request of an end user.

Seeded Values
  • Attribute1 > Your message has been sent.
Called By
  • MailMessages.cs - SendMail
Back to Top
XX_SYSTEMMAINTENANCE System Parameter
General Information

This parameter allows an adminstrator to put the application in maintenance mode. A value of Yes in attribute1 will only allow users with the role specified in XX_SYSTEMMAINTROLE to login to the application. A value of No in attribute1 will allow all users to login to the application.

Seeded Values
  • Attribute1 > No
Called By
  • root > Default.aspx
Back to Top
XX_SYSTEMMAINTMESSAGE System Parameter
General Information

The value in attribute1 will be displayed to the end user when the application is in maintenance mode. It is the message that tells the end user that the system is unavailable. It is a 128 character limit.

Seeded Values
  • Attribute1 > The application is currently down for maintenance. Please check again later.
Called By
  • root > Default.aspx
Back to Top
XX_SYSTEMMAINTROLE System Parameter
General Information

The role specified in attribute1 will be allowed to login to the application when the XX_SYSTEMMAINTENANCE system parameter is set to Yes.

WARNING! This system parameter must stay as the administrator role in the current build of the application. If you change it to Camp Administrator or Camp User, the person with that role will NOT have the permissions to update the XX_SYSTEMMAINTENANCE system paramter and take the application out of maintenance mode. Modifications to this functionality are planned for future releases.

Seeded Values
  • Attribute1 > Administrator
Called By
  • root > Default.aspx
Back to Top
XX_SYSTEMREPLYTOEMAILERRORMESSAGE System Parameter
General Information

This is used to display an error message to the end user when sending an email if the reply to address can't be determined.

Seeded Values
  • Attribute1 > Invalid Reply To Email Address.
Back to Top
XX_SYSTEMUPLOADLINKPATH System Parameter
General Information

This parameter is used to build the link on the Send Files and Receive Files Feature. This parameter should not be changed without instructions from support.

Seeded Values
  • Attribute1 - ../Uploads/
Back to Top
XX_TEXTMESSAGEDELAY System Parameter
General Information

The is used to set a delay in milliseconds when sending multiple text messages. It is used for sending schedules.

Seeded Values
  • Attribute1 - 500
Back to Top
XX_UNITUSERCAMENU System Parameter
General Information

This parameter controls the name of the Camp Analytics Menu on Unit User menu page.

Seeded Values
  • Attribute1 - Camp Analytics
  • Attribute2 - ZZZ_CAMPANALYTICS
Back to Top
XX_UNITUSEROTHERMENU System Parameter
General Information

This parameter controls the name of the Other Menu on Unit User menu page.

Seeded Values
  • Attribute1 - Other Items
  • Attribute2 - ZZ_OTHER
Back to Top
XX_USEONLINEPAYMENTS System Parameter
General Information

This parameter controls the use of online payments in the payment module. When this parameter is No, an end user will not be allowed to perform an online payment transaction. The end user will receive the warning message from the XX_USEONLINEPAYMENTSMSG system parameter. When this value is Yes, the end user will be redirected the payment provider chosen by the organization.

Seeded Values
  • Attribute1 - No
Back to Top
XX_USEONLINEPAYMENTSMSG System Parameter
General Information

This parameter controls the message that is displayed to the end user when online payments are not configured.

Seeded Values
  • Attribute1 - Online payment feature is not configured. Please contact your system administrator.
Back to Top
XX_UNITLEADERPRICE System Parameter
General Information

This parameter overrides the event fee for unit leaders.

Seeded Values
  • Attribute1 - 0
Back to Top
XX_UNITUSERREPORTSMENU System Parameter
General Information

This parameter controls the name of the Reports Menu on Unit User menu page.

Seeded Values
  • Attribute1 - Reports
  • Attribute2 - Z_REPORTS
Called By
  • Unit User - Default.aspx
Back to Top
ZZ_EMPTYDDL System Parameter
General Information

This parameter is used in certain instances to set intial values in drop down lists. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 > N/A
  • Attribute2 > -1
  • Attribute3 > 999
Called By
  • N/A
Back to Top
ZZ_TABLECOL1024LENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 - 1024
Called By
  • CampAdmin - Import.aspx.cs
Back to Top
ZZ_TABLECOL48LENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 - 48
Called By
  • N/A
Back to Top
ZZ_TABLECOL50LENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 - 50
Called By
  • N/A
Back to Top
ZZ_TABLECOLATTRIBUTELENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 > 128
Called By
  • N/A
Back to Top
ZZ_TABLECOLCODELENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 > 40
Called By
  • N/A
Back to Top
ZZ_TABLECOLNAMELENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 > 256
Called By
  • N/A
Back to Top
ZZ_TABLECOLYESNOLENGTH System Parameter
General Information

This parameter is a static value for column lengths. It is used to validate certain strings are the correct size to fit within the database column. This system parameter should not be modified without authorization from support.

Seeded Values
  • Attribute1 > 1
Called By
  • N/A
Back to Top
Related Topics
System Parameters